Anviloy 1050 tungsten alloy rod containing tungsten and molybdenum are well-known to solve the problems (insufficient thermal conductivity, high wear, sticking of aluminum) with molds in light metal die casting. The most commonly used, high-tech, products in the Die Casting Industry is Anviloy 1050 tungsten alloy rod. The use of Anviloy 1050 tungsten alloy rod during the foundry process can both improve quality and lower costs. Die cast tooling, extrusion dies, hot runner nozzles, vibration and tool chatter reduction, plastic…

Anviloy 1150 tungsten alloy rod has the high thermal conductivity and low coefficient of expansion, which resists thermal fatigue in most applications. Its high melting point gives it low solubility in the molten metal being cast, thereby reducing or eliminating soldering and erosion. The addition of alloying elements by powder metallurgy techniques increases ductility and makes it easily machined by conventional techniques. Anviloy 1150 tungsten alloy rod is developed primarily for die-casting, aluminum permanent molding, and for difficult extrusion dies.…

AMST 21014 class4 tungsten alloy rod has very high melting point and have a density twice that of steel and are more than 50% heavier than lead. Due to their high density, tungsten alloys offer greater radiation shielding than lead and are non-toxic. It is electrically and thermal conductive and offer good corrosion resistance. It also has a low coefficient of expansion and has a high modulus of elasticity. The properties of AMST 21014 class4 tungsten alloy rod are: Alloy…

AMST 21014 class3 tungsten alloy rod has many special properties such as high density, high melting point, wear resistance, high tensile strength, good elongation capacity, low vapor pressure, excellent thermal stability and high radiation absorption capacity, etc. The properties of AMST 21014 class3 tungsten alloy rod are: Alloy Type：95%WNiFe, 95%WNiCu Density: 17.75~18.35g/cm3 Hardness Max: 34HRC Elongation: 3~10% Tensile Strength Max: 971MPa Impact Toughness Max: 43J/cm2 AMST 21014 class3 tungsten alloy rod can be delivered to customers as finished products based…

AMST 21014 class2 tungsten alloy rod has high density, high melting point, small capacity, excellent hardness, superior wearing resistance, high ultimate tensile strength, etc. It can be machined further into the parts of counterweights, radiation shielding, military defense appliances, welding rods, extrusion dies or radiation shielding. Some are used in sports to create darts, billets, golf club, etc. The properties of AMST 21014 class2 tungsten alloy rod are: Alloy Type：92.5%WNiFe, 92.5%WNiCu Density: 17.15~17.85g/cm3 Hardness Max: 33HRC Elongation: 5~15% Tensile Strength…

AMST 21014 class1 tungsten alloy rod is produced by pressing and sintering metal powders into billets, which is worked by rolling or swaging into rod. Smaller sizes are produced by subsequent drawing. It is produced in straight random lengths with a smooth swaged surface at diameters 3mm and larger, and with a smooth drawn finish below 3mm. A centerless ground finish can also be furnished. Specific lengths and special fabrications can be supplied upon request. The properties of AMST 21014…

WNF-3515 tungsten alloy rod has excellent radiation resistance, thermal and electric conductivities, corrosion resistance and machinable. Chinatungsten Online is experienced in the use of tungsten alloy and a wide variety of tungsten alloy rods to manufacture precision components. Please review the properties of our standard of products along with information about their specific applications. The properties of WNF-3515 tungsten alloy rod are: Nominal W Content: 95 wt.% Nominal Nickel Content: 3.6 wt.% Nominal Iron Content: 1.4 wt.% MIL-T-21014: Class 3…

WNF-5421 tungsten alloy rod has many special properties such as high density, high melting point, good elongation capacity, low vapor pressure, excellent thermal stability and high radiation absorption capacity, etc. As a contact supplier of leading manufacturers of tungsten alloy rods, Chinatungsten Online has acquired a unique capacity to produce tungsten based alloys fulfilling the most severe requirements, on the basis of powder metallurgy techniques. The properties of WNF-5421 tungsten alloy rod are: Nominal W Content: 92.5 wt.% Nominal Nickel…

WNF-7129 tungsten alloy rod has incredible strength, consistent durability and long-lasting value. It is intended for uses such as weights or counter-balances in static or dynamic balancing, high speed rotating inertia members, radiation shielding, hypervelocity impact, and vibration-damping applications. The properties of WNF-7129 tungsten alloy rod are: Nominal W Content: 90 wt.% Nominal Nickel Content: 7.1 wt.% Nominal Iron Content: 2.9 wt.% MIL-T-21014: Class 1 SAE-AMS-T-21014: Class 1 AMS 7725 B: 7725 B ASTM B777-87: Class 1 Minimum Density: 16.85…

HPM1850W tungsten alloy rod provides a unique combination of density, mechanical strength, machinability, corrosion resistance, and economy. It also provides distinct advantages when compared to traditional high-density materials such as lead or uranium. HPM1850W tungsten alloy rod is the perfect choice for radiation shielding, boring bars and grinding quills, crankshaft balancing, rotating inertia members, ordnance components, and high-temperature tooling applications. The properties of HPM1850W tungsten alloy rod are: Tungsten content: 97.0% Density: 18.5±0.2g/cm3 Hardness：≤340 HV10 Tensile Strength (typical value): 890MPa…