ASTM B777-15 class2 tungsten alloy rod is produced by pressing and sintering metal powders into billets, which is worked by rolling or swaging into rod. Smaller sizes are produced by subsequent drawing. It is produced in straight random lengths with a smooth swaged surface at diameters 3mm and larger, and with a smooth drawn finish below 3mm. A centerless ground finish can also be furnished. Specific lengths and special fabrications can be supplied upon request. The properties of ASTM B777-15…

ASTM B777-15 class1 tungsten alloy rod provides a unique combination of density, mechanical strength, machinability, corrosion resistance, and economy. It also provides distinct advantages when compared to traditional high-density materials such as lead or uranium. Chinatungsten Online is capable of supplying raw material or finished parts as well as custom grades to our customer’s specifications. The properties of ASTM B777-15 class1 tungsten alloy rod are: Matrix: 90% W Density: 16.85~17.30g/cc Hardness Rockwell Max: 32HRC Standard Alloy Ultimate Tensile Strength: 110…

AMS 7725E class4 tungsten alloy rod has many special properties such as high density, high melting point, good elongation capacity, low vapor pressure, excellent thermal stability and high radiation absorption capacity, etc. Chinatungsten Online is experienced in the use of tungsten alloy and a wide variety of tungsten alloy rods to manufacture precision components. Please review the properties of our standard of products along with information about their specific applications. The properties of AMS 7725E class4 tungsten alloy rod are:…

AMS 7725E class3 tungsten alloy rod has excellent radiation resistance, thermal and electric conductivities, corrosion resistance and machinable. As a contact supplier of leading manufacturers of tungsten alloy rods, Chinatungsten Online has acquired a unique capacity to produce tungsten based alloys fulfilling the most severe requirements, on the basis of powder metallurgy techniques. The properties of AMS 7725E class3 tungsten alloy rod are: Matrix: 95% W Density: 17.75~17.35g/cc Hardness Rockwell Max: 34HRC AMS 7725E: Class3 Type1 Ultimate Tensile Strength: 94…

AMS 7725E class2 tungsten alloy rod has high density, high melting point, small capacity, excellent hardness, superior wearing resistance, high ultimate tensile strength, etc. It can be machined further into the parts of counterweights, radiation shielding, military defense appliances, welding rods, extrusion dies or radiation shielding. Some are used in sports to create darts, billets, golf club, etc. The properties of AMS 7725E class2 tungsten alloy rod are: Matrix: 92.5% W Density: 17.15~17.85g/cc Hardness Rockwell Max: 33HRC AMS 7725E: Class2…

AMS 7725E class1 tungsten alloy rod has many special properties such as high density, high melting point, wear resistance, high tensile strength, good elongation capacity, low vapor pressure, excellent thermal stability and high radiation absorption capacity, etc. The properties of AMS 7725E class1 tungsten alloy rod are: Matrix: 90% W Density: 16.85~17.30g/cc Hardness Rockwell Max: 32HRC AMS 7725E: Class1 Type1 Ultimate Tensile Strength: 94 KSI and 648 MPa Yield Strength (0.2% offset): 75 KSI and 517 MPa Elongation: 2% AMS…

Mil T 21014D class4 tungsten alloy rod has the high thermal conductivity and low coefficient of expansion, which resists thermal fatigue in most applications. Its high melting point gives it low solubility in the molten metal being cast, thereby reducing or eliminating soldering and erosion. The properties of Mil T 21014D class4 tungsten alloy rod are: Matrix: 97% W Density: 18.25~18.85g/cc Hardness Rockwell Max: 35HRC Ultimate Tensile Strength: 100 KSI Yield Strength (0.2% offset): 75KSI Elongation: 2% Chinatungsten Online helps…

Mil T 21014D class3 tungsten alloy rod begins as metal powder, is pressed into ingots, sintered, and then swaged and drawn down. It has excellent radiation resistance, electric and thermal conductivities and corrosion resistance characters with high density and good mechanical strength. Chinatungsten Online offers a unique combination of engineering properties: a tensile property, good corrosion resistance, and is easily machinable with common shop tools and techniques. The properties of Mil T 21014D class3 tungsten alloy rod are: Matrix: 95%…

Mil T 21014D class2 tungsten alloy rod is intended for uses such as weights or counter-balances in static or dynamic balancing, high-speed rotating inertia members, radiation shielding, hypervelocity impact, and vibration-damping applications. The advanced drawing / swaging process of Chinatungsten Online enables us to tailor the product to meet specific customer material and performance requirements to ensure optimal performance in your application. The properties of Mil T 21014D class2 tungsten alloy rod are: Matrix: 92.5% W Density: 17.15~17.85g/cc Hardness Rockwell…

Mil T 21014D class1 tungsten alloy rod is manufactured using Chinatungsten Online’ strict quality measures, guaranteeing a consistent, reliable material. It has very high melting point and a density twice that of steel is more than 50% heavier than lead. Due to its high density, tungsten alloys offer greater radiation shielding than lead and is non-toxic. It is electrically and thermal conductive and offer good corrosion resistance. It also has a low coefficient of expansion and a high modulus of…