HPM1750 Tungsten Alloy Rod

HPM1750 tungsten alloy rod has very high melting point and have a density twice that of steel and are more than 50% heavier than lead. Due to their high density, it offers greater radiation shielding than lead and is non-toxic. It is electrically and thermal conductive and offer good corrosion resistance. It also has a low coefficient of expansion and has a high modulus of elasticity.

HPM1750 tungsten alloy rod pictureThe properties of HPM1750 tungsten alloy rod are:
Tungsten content: 92.5%
Density: 17.5±0.2g/cm3
Hardness:≤325 HV10
Tensile Strength (typical value): 840MPa
Minimal Yield Strength (0.2% offset): 520MPa
Elongation (typical value): 14%
Young’s Modulus (average value): 340MPa
Median Coefficient of Thermal Expansion 20~100℃:5.5μm/(m•K)
Median Coefficient of Thermal Expansion 20~300℃:5.7μm/(m•K)
Median Coefficient of Thermal Expansion 20~450℃:5.8μm/(m•K)
Thermal Conductivity: ≥75 W/(m•K)
Electrical Conductivity (average value):12% IACS and 6.9 MS/m
Specific Electrical Resistance(average value): 0.15μΩ•m
Permeability: >1.05μ

More details, please visit:
http://www.tungsten-alloy.com/tungsten-alloy-rod.html

Comments are closed.

Address: 3F, No.25-1 WH Rd., Xiamen Software Park Ⅱ, FJ 361008,China Copyright © 1997 - 2024 CTIA All Rights Reserved
Phone:+86-592-5129696,+86-592-5129595;    Email: sales@chinatungsten.com
旧版
Baidu
map